We cannot verify this setup because its operating clearances have not been measured. Product dimensions alone cannot answer whether it works in the space.
Pour-over brew bar on a cart
- You must buy
- $250 – $600
- Optional adds
- $250 – $650
- Space
- Bar cart
- Ode Brew Grinder Gen 2 editorial band, drawn but not stated - no checked price stands behind it
- Virtuoso+ Coffee Grinder (ZCG587) editorial band, drawn but not stated - no checked price stands behind it
- Stagg EKG Electric Kettle editorial band, drawn but not stated - no checked price stands behind it
- Hario V60 Ceramic Pour Over Coffee Set (02, White) editorial band, drawn but not stated - no checked price stands behind it
- OXO Good Grips 3-Piece POP Round Canister Set editorial band, drawn but not stated - no checked price stands behind it
Figures are editorial budget bands, not live prices. A band is a range, so a build has a cheapest and a dearest version and both are shown.
Will it fit your space?
Not established- Width available
- 600 mm
- Depth available
- 400 mm
- Height available
- 400 mm
the bar under the plan is 100 mm. Station drawn at 600 × 400 mm.
- Ode Brew Grinder Gen 2105 × 239 mmmanufacturer figure, not measured by us
operating clearance not established. Not one clearance figure exists for any item in this setup, so the region around each drawn item has no size, is not to scale, and cannot be measured against the bar. Where the plan is drawn is a packing illustration, not a recorded layout.
at most 495 mm of width left over: 600 mm available less 105 mm of recorded envelope. Arithmetic on recorded envelopes only - no clearance is subtracted.
Bar cart drawn to scale at 600 by 400 millimetres. 1 item drawn from recorded envelopes: Ode Brew Grinder Gen 2 105 by 239 millimetres. Operating clearance is not established for any item, so the region around each one is drawn without a committed size and cannot be measured. At most 495 millimetres of width is left over: 600 available less 105 of recorded envelope, with no clearance subtracted.Product dimensions only - operating clearance not established
We hold the manufacturer's product dimensions for part of this setup, but a product envelope is not an operating requirement - it says nothing about the room needed to lift a water tank out, swing a portafilter or load a hopper. Until those are measured, this answer stays open rather than being estimated from the box figures.
- clearance above
Evidence on record: 3 of 6 fields.
Will your circuit take it?
- US 15A shared kitchen circuitNot established
Draw not computable. 2 items have no recorded power rating: Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White).
Draw on the US 15A shared kitchen circuit is not computable: 2 items in this setup have no recorded power rating (Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White)).Electrical fit not established - power rating missing
Power rating missing for: Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White)
- US 20A shared kitchen circuitNot established
Draw not computable. 2 items have no recorded power rating: Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White).
Draw on the US 20A shared kitchen circuit is not computable: 2 items in this setup have no recorded power rating (Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White)).Electrical fit not established - power rating missing
Power rating missing for: Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White)
- US 20A dedicated circuitNot established
Draw not computable. 2 items have no recorded power rating: Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White).
Draw on the US 20A dedicated circuit is not computable: 2 items in this setup have no recorded power rating (Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White)).Electrical fit not established - power rating missing
Power rating missing for: Stagg EKG Electric Kettle, Hario V60 Ceramic Pour Over Coffee Set (02, White)
Judged as a US 120V circuit under the US continuous-load rule (80% of the breaker rating).
Draw is computed from the manufacturer's own rating plate. The breaker figure is what trips when everything runs at once; the continuous figure is the code limit for a load running three hours or more, which an espresso shot is not. Both are shown rather than one, because collapsing them would either overstate or understate the risk.
What the setup contains
- Ode Brew Grinder Gen 2Grinder
- Stagg EKG Electric KettleKettlekettle; identity-gated (the brand handle sells the EKG Pro), no sourced figure yet
- Hario V60 Ceramic Pour Over Coffee Set (02, White)Filter brewerdripper; no dimension on record, so it carries no fit decision
- OXO Good Grips 3-Piece POP Round Canister SetStation furniture
- Virtuoso+ Coffee Grinder (ZCG587)Grindersubstitute for fellow-ode-gen2
What this check cannot see
Space is judged against the station's stated width, depth and height, using each product's envelope and whatever operating clearances are on record. The check does not see an obstacle inside that gap - a cabinet overhang, a wall bracket, a splashback lip - or anything you keep on the counter that is not part of this setup.
Electrical load is the sum of the products declared here against one circuit profile. It does not see other appliances on the same circuit that this setup does not declare, the condition of your wiring, or a supply outside the regime the circuit names.
Pairings are recorded one by one. A pairing that is not recorded reads Not established, which is not a finding that it works and not a finding that it does not.
What we hold, and where it came from
| Measurement | Stagg EKG Electric Kettle | OXO Good Grips 3-Piece POP Round Canister Set | Virtuoso+ Coffee Grinder (ZCG587) | Ode Brew Grinder Gen 2 | Hario V60 Ceramic Pour Over Coffee Set (02, White) |
|---|---|---|---|---|---|
| width | 172 mm manufacturersource | Not established | 130 mm manufacturersource | 105 mm manufacturersource | 140 mm manufacturersource |
| depth | 282 mm manufacturersource | Not established | 150 mm manufacturersource | 239 mm manufacturersource | 121 mm manufacturersource |
| height | 196 mm manufacturersource | Not established | 340 mm manufacturersource | 248 mm manufacturersource | 210 mm manufacturersource |
| clearance above | Not established | Not established | Not established | Not established | Not established |
| tank-removal clearance | Not established | Not established | Not established | Not established | Not established |
| rear clearance | Not established | Not established | Not established | Not established | Not established |