Grinder
Ode Brew Grinder Gen 2
Single dose 64 mm flat burrs in the narrowest and shortest grinder body on the site, 4.1 in (10.5 cm) across.
$400Price held until 12 September
At Fellow, read on 10 September. We stop quoting this number on 12 September and will send you to look instead.
Against your counter
Your counter, drawn to scale, with the machine standing on it.
Give us the three numbers and this drawing puts the machine on your own counter.
Plan4.1 in10.5 cm9.4 in23.9 cm
Front9.8 in24.8 cmtank direction not on record
Room the Ode Brew Grinder Gen 2 asks for around it
Nothing is drawn for a figure nobody states, and the answer above stays at what published figures can carry.
We hold 3 of the 7 figures a fit check asks of this grinder. Nothing fits on its own, it fits a particular counter, so this page holds the figures and a setup makes the call.
You will like it if
Your counter has 4.1 in (10.5 cm) across and 9.4 in (23.9 cm) front to wall to give it, with 9.8 in (24.8 cm) clear above.
Depth is on record at 9.4 in (23.9 cm), and it is the figure most likely to end this search. Measure the space you have against it before anything else. Measure from the very back of the item to the very front, including any drip tray or handle. (manufacturer)
Choose another if
Your counter has more room than this one asks for. The Virtuoso+ Coffee Grinder (ZCG587) is 3.6 in (9.2 cm) larger tall, in the same category, and the site holds its width, depth and height figures too.
Not ours to say
Shot quality: nobody here has held one, so there is no verdict.Reliability over five years: nobody here has held one, so there is no verdict.Build quality: nobody here has held one, so there is no verdict.The setup it lives in
Against another one · the 3 comparisons where both hold the same figure
Where to buy
What owners report
Owners' own words, from reviews and forums, on the things no maker states: the tank, the hopper, the room around the machine. Each one is one voice, counted; none is evidence for a figure.
What owners report about the room it needs 6 reports
Owner report, not evidenceRead 10 September 2026. Owners' own words on what no maker states; never a figure, never used for fit.
room aboveone owner
the space under my kitchen cabinets is limited
an owner works in limited headroom and taps the hopper with a cup rather than fitting a bellows
a forum post, www.home-barista.com · 2025-09-07 · one voice, a single post · read 10 September 2026
reaching the hoppertwo owners
I wish there was a rim around the whole thing that was deep enough
the hopper lid does not seat securely because its rim is too shallow
a review video's captions, www.youtube.com · 2023-03-01 · one voice, a single post · read 10 September 2026
auto-generated captions
there's also that awkwardness to the lids of both the hopper and the catch cup
a second reviewer finds both lids awkward to seat
a review video's captions, www.youtube.com · 2023-03-14 · one voice, a single post · read 10 September 2026
auto-generated captions
loading the hopperthree owners
the angle of the hopper has changed
Gen 2 steepened the hopper so poured beans fall through instead of sitting in it
a review video's captions, www.youtube.com · 2023-02-27 · one voice, a single post · read 10 September 2026
uploaded captions, not auto-generated
the sleek just-in-time load bin suits my needs perfectly
the grinder is loaded from the top one dose at a time, with no standing hopper to empty when beans change
a review on a retailer's site, clivecoffee.com · 2025-02-21 · one voice, from a page of 16 · read 10 September 2026
the low angle of the hopper and the style of feedport
oily beans feed badly because the loading bin sits at a shallow angle above a narrow port
a review on a retailer's site, clivecoffee.com · 2025-01-07 · one voice, from a page of 16 · read 10 September 2026
What owners report about living with it 7 reports
Noise, mess, the first weeks, how it holds up: what owners wrote about the days after the box. Reviews, in their words, counted one by one; none is a measurement and none touches the fit answer.
Owner report, not evidenceRead 10 September 2026. Owners' own words on what no maker states; never a figure, never used for fit.
cleaning itone owner
Ok so I cleaned the little tabs in the chute and it sorted things
brushing the anti-static tabs inside the chute restores the behaviour the grinder had when new
a forum post, www.home-barista.com · 2023-03-24 · one voice, a single post · read 10 September 2026
the same post says getting a brush in behind the parts that clog is awkward but takes seconds
how loud it isthree owners
this one is way less noise and static
an owner of the first generation finds the second quieter and less prone to static
a review on a retailer's site, clivecoffee.com · 2026-07-03 · one voice, from a page of 16 · read 10 September 2026
It grinds fast, quietly, and oh, the clarity it brings to the cup
a dated owner rates the grinder quiet
a review on a retailer's site, clivecoffee.com · 2026-07-10 · one voice, from a page of 16 · read 10 September 2026
the same review says he replaced a Baratza Encore with it
Nice and quiet. Solid build and versatility
a third dated owner rates the grinder quiet
a review on a retailer's site, clivecoffee.com · 2025-03-05 · one voice, from a page of 16 · read 10 September 2026
written through the Shop App and not marked verified on the shop
static and messthree owners
static grounds all over the top of the container, random drops and .5-.7g of retention
grounds land on the catch cup and retention rises to roughly half a gram from about a tenth
a forum post, www.home-barista.com · 2023-03-21 · one voice, a single post · read 10 September 2026
the same post dates the change to about six weeks of use and says the behaviour is close to the first generation's
Very quiet, zero frass from static
an owner reports it quiet with no static-driven mess
a review on a retailer's site, www.wholelattelove.com · 2024-12-18 · one voice, from a page of 9 · read 10 September 2026
the massive issues with grind retention and mess
an owner who replaced a Baratza Encore says the shop never disclosed the retention and mess problems, and found aftersales help unhelpful
a review on a retailer's site, clivecoffee.com · 2023-03-10 · one voice, from a page of 16 · read 10 September 2026
the shop does not mark this reviewer verified
Every fact on record, with its source and its date · 6 facts
| Product | Fact | Value | Source type | Source | Checked | State | Used | What it decides |
|---|---|---|---|---|---|---|---|---|
| Ode Brew Grinder Gen 2 | depth | 9.4 in (23.9 cm) | Manufacturer | fellowproducts.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for fit | |
| Ode Brew Grinder Gen 2 | height | 9.8 in (24.8 cm) | Manufacturer | fellowproducts.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for fit | |
| Ode Brew Grinder Gen 2 | voltage | 120 V | Manufacturer | fellowproducts.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for power | |
| Ode Brew Grinder Gen 2 | wattage | 140 W | Manufacturer | fellowproducts.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for power | |
| Ode Brew Grinder Gen 2 | weight | 10.1 lb (4.6 kg) | Manufacturer | fellowproducts.com | Evidence: complete, from published figures, not measured: Published | Yes | Not used for fit | |
| Ode Brew Grinder Gen 2 | width | 4.1 in (10.5 cm) | Manufacturer | fellowproducts.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for fit |
The picture · why this one is drawn
Read6 September 2026Sourcesfellowproducts.com · AmazonMeasured by usnothing yet; published figures only