Our drawing of the Takeya Cold Brew Coffee Maker pitcher with its filter, filled with cold brew, three-quarter view from the front right
Our drawing of the De'Longhi LatteMix milk frother in brushed stainless steel on its base, side view with the handle to the right
Our drawing of the Hario Skerton Pro ceramic coffee mill, three-quarter view from the front right

For one or two people in a small kitchen who drink iced coffee and milk drinks at home, dairy or plant milk, and have no room for an espresso machine.

On the figures we have, the Skerton Pro Ceramic Coffee Mill and Takeya Cold Brew Coffee Maker take a counter at least 12.7 in (32.2 cm) wide by 4.1 in (10.4 cm) deep; the De'Longhi LatteMix Cold and Hot Milk Frother prints its size without saying which figure is which, so measure the De'Longhi LatteMix Cold and Hot Milk Frother before you buy.

Against your counter

Will this setup fit your counter?

Takeya Cold Brew Coffee Maker is 6.1 in (15.5 cm) wide, 4.1 in (10.4 cm) deep and 9.3 in (23.5 cm) tall (takeyausa.com, 30 September 2026). Every figure behind this is a manufacturer's published dimension, and nobody has put a tape on one.

Your counter, drawn to scale, with the machine standing on it.

Give us the three numbers and this drawing puts the machine on your own counter.

Your counter

Total: $263.44 · prices as of Oct 28.

What would you buy for this setup?

3 items, in buying order: Takeya Cold Brew Coffee Maker, Skerton Pro Ceramic Coffee Mill (MMCS-2B), De'Longhi LatteMix Cold and Hot Milk Frother.

What should you buy first, and what later?

Three boxes now.

Our drawing of the Hario Skerton Pro ceramic coffee mill, three-quarter view from the front right
2 · Skerton Pro Ceramic Coffee Mill (MMCS-2B)Buy today, with it. The setup does not work without it.
Our drawing of the De'Longhi LatteMix milk frother in brushed stainless steel on its base, side view with the handle to the right
3 · De'Longhi LatteMix Cold and Hot Milk FrotherBuy today, with it. The setup does not work without it.
De'Longhi$179.95At De'Longhi · Oct 28View at De'Longhi

The full check

What would change this

Measuring the 3 missing figures on the De'Longhi LatteMix Cold and Hot Milk Frother would let the fit be computed at all.

Depth is what kills these setups

This station is 23.6 in (60 cm) front to wall. The Takeya Cold Brew Coffee Maker is 4.1 in (10.4 cm) deep, and nobody publishes the room it needs behind it, so the depth line is still open.

Today

The Takeya Cold Brew Coffee Maker, the De'Longhi LatteMix Cold and Hot Milk Frother and the Skerton Pro Ceramic Coffee Mill

Nothing else in the plan does anything until this is on the counter. It is also the only line we would price to the dollar, and only while a price is still inside our two-day window.

A sunlit compact coffee station in a small kitchen: a stainless espresso machine and a grinder on a short oak counter under a white wall cabinet, a cup and a folded cloth, a window at the side

One last thing before you order.

Measure the depth of the De'Longhi LatteMix Cold and Hot Milk Frother. Depth decides whether it sits inside the counter's edge.

Why the price disappears tomorrow

We keep the shop, the page and the moment for every price. After two days the number is a story about the past, so we stop telling it and send you to look. Nothing about the machine changed; what changed is how much we are willing to claim.

Where to confirm stock

Stock moves faster than we can watch it; the shop's own page is the truth.

What every picture on this site is

We keep a record of where a factual picture of each machine exists and on what basis it could be used. Of the three here, for three none was found. For none of them have we found anything that lets us use that picture, and a picture on a public product page is not a licence. The photographs are rooms we commissioned; where equipment stands in one it stands for the kind of thing that lives on a counter, and it is never the specific model that entry is about. No photograph here is captioned with a product, priced, or offered as a picture of what you would buy. Where no factual picture of a machine is cleared for use, we draw it from the maker's own image and compare the drawing back against that image; the picture beside a product is our own drawing, with the name set in type and no lettering inside it, and the mark on it says so.

The full check

What fits, what to measure before you order, and where each figure comes from.

Will this setup work in your space?

Cold brew and milk-drinks corner for a small kitchen

Measuring 3 figures settles whether this setup fits.

We cannot verify this setup because the measurements it depends on have not been collected.

3 checks remain

Do this firstMeasure the depth of the De'Longhi LatteMix Cold and Hot Milk Frother

See what is missing

Before you buy: 3 things to check

The one that decides the most is first, and how to do each is under it.

  1. To do: Measure: Measure

    Measure the depth of the De'Longhi LatteMix Cold and Hot Milk Frother

    Depth decides whether it sits inside the counter's edge. Without it we cannot say whether the setup fits.

    How: Measure from the very back of the item to the very front, at its deepest point.

  2. To do: Measure: Measure

    Measure the height of the De'Longhi LatteMix Cold and Hot Milk Frother

    Height decides whether it clears whatever is above the counter. Without it we cannot say whether the setup fits.

    How: Measure from the counter to the highest point, with any lid or hopper closed.

  3. To do: Measure: Measure

    Measure the width of the De'Longhi LatteMix Cold and Hot Milk Frother

    Width decides whether it sits on the counter at all. Without it we cannot say whether the setup fits.

    How: Measure the widest point, from the left edge to the right edge, in millimetres.

7 more figures we don't hold yet, none of them needed for the answer
  1. To do: Measure: Measure

    Measure the space behind the Skerton Pro Ceramic Coffee Mill (MMCS-2B)

    A machine pushed against the wall can overheat or block its own cable and drain.

  2. To do: Measure: Measure

    Measure the space beside the Skerton Pro Ceramic Coffee Mill (MMCS-2B)

    Knobs, steam wands and grinder hoppers need room to move.

  3. To do: Measure: Measure

    Measure the space above the Skerton Pro Ceramic Coffee Mill (MMCS-2B)

    A lid or a bean hopper has to open without hitting a cabinet.

  4. To do: Measure: Measure

    Measure the space behind the Takeya Cold Brew Coffee Maker

    A machine pushed against the wall can overheat or block its own cable and drain.

  5. To do: Measure: Measure

    Measure the space beside the Takeya Cold Brew Coffee Maker

    Knobs, steam wands and grinder hoppers need room to move.

  6. To do: Measure: Measure

    Measure the space above the Takeya Cold Brew Coffee Maker

    A lid or a bean hopper has to open without hitting a cabinet.

  7. To do: Measure: Measure

    Measure the room to lift the water tank out of the Takeya Cold Brew Coffee Maker

    If the tank lifts out of the top, you need that much room above the machine, or you will pull the machine out to refill it.

What we need you to measure to finish the answer

Measure the depth of the De'Longhi LatteMix Cold and Hot Milk Frother

Depth decides whether it sits inside the counter's edge.

What to measure
How far it comes forward from the back.
How
Measure from the very back of the item to the very front, at its deepest point.
What happens next
We re-run the fit check here, in your browser, with your figure in place of the one we lack. The published answer above does not change.

Stays in this browser only. Not sent to Setistry, not independently verified, and the verdict above does not change.

walldepthplan view

The four questions

Space, power, budget, and how sure we are of each.

Fit

Will it fit the counter?

Enter your counter depth and cabinet height to check the fit.

Show the numbers
See the space
Power

Can it run on the outlet?

Likely, from published figures: Likely

Yes. Within the continuous limit on all 3 reference circuits. At least one figure behind this is a number nobody has stated.

Show the numbers
15 A shared kitchen circuitLikely, from published figures: Likely
20 A shared kitchen circuitLikely, from published figures: Likely
See the circuit
Budget

Is it within budget?

Budget: every item has a current price; no ceiling is stated: Every item priced

No ceiling is stated for this setup.

Show the numbers
$263.44no ceiling stated
See the budget
Evidence

How sure are we?

Evidence: a decision figure is missing or unsourced: Needs a check

Partly. 6 of 16 measurements are usable; the rest are missing or have no source.

Show the numbers
See the sources

How to read these answers

What's in this setup 3 items

  • Our drawing of the Takeya Cold Brew Coffee Maker pitcher with its filter, filled with cold brew, three-quarter view from the front right
    Required · Filter brewer

    Takeya Cold Brew Coffee Maker

    $24.99At Takeya · Oct 28

    The setup lists it; every figure behind it is in the table below, with its source and its date.

    Fit data: published: PublishedFit data. Every measurement a fit needs is published (3 of 7), none measured by us. 3 of 7 usable

    Price: from the last 48 hours: CurrentPrice. Its price is from the merchant's page within the last 48 hours, though no other shop confirms this reading. Price as of Oct 28

    Evidence: complete, from published figures, not measured: PublishedTo check. Nothing pending before you buy. Figures we don't hold yet, none needed for the answer: space behind it, space beside it, space above it, room to lift the water tank out.

    Sold at Takeya.
  • Our drawing of the De'Longhi LatteMix milk frother in brushed stainless steel on its base, side view with the handle to the right
    Required · Accessory

    De'Longhi LatteMix Cold and Hot Milk Frother

    $179.95At De'Longhi · Oct 28

    makes one milk drink per run: a maximum frothing capacity of 120 ml and a warming capacity of 240 ml, so two milk drinks take two runs

    Fit data: needs a check: Needs a checkFit data. 0 of 3 measurements are usable; 3 the fit needs are still missing. 0 of 3 usable

    Price: from the last 48 hours: CurrentPrice. Its price is from the merchant's page within the last 48 hours. Price as of Oct 28

    Evidence: a decision figure is missing or unsourced: Needs a checkTo check. depth, height, width.

    Sold at De'Longhi.
  • Our drawing of the Hario Skerton Pro ceramic coffee mill, three-quarter view from the front right
    Required · Grinder

    Skerton Pro Ceramic Coffee Mill (MMCS-2B)

    $58.50At Hario USA · Oct 28

    the coarse grinder for the cold brew

    Fit data: published: PublishedFit data. Every measurement a fit needs is published (3 of 6), none measured by us. 3 of 6 usable

    Price: from the last 48 hours: CurrentPrice. Its price is from the merchant's page within the last 48 hours, though no other shop confirms this reading. Price as of Oct 28

    Evidence: complete, from published figures, not measured: PublishedTo check. Nothing pending before you buy. Figures we don't hold yet, none needed for the answer: space behind it, space beside it, space above it.

    Sold at Hario USA.

Where each item is sold

What each merchant showed, and the day we looked.

ItemMerchantAvailabilityPriceReturnsRoute
Takeya Cold Brew Coffee MakerTakeyathe brand's own storeCheck the shop's page for stockPrice: Oct 28: Oct 28$24.99Check the seller's return window before you buy.
De'Longhi LatteMix Cold and Hot Milk FrotherDe'Longhithe brand's own storeCheck the shop's page for stockPrice: Oct 28: Oct 28$179.95Check the seller's return window before you buy.
Skerton Pro Ceramic Coffee Mill (MMCS-2B)Hario USACheck the shop's page for stockPrice: Oct 28: Oct 28$58.50Check the seller's return window before you buy.

Compare this setup with the others

Why should you trust this answer?

The space, the sources, the disagreements, and what this check cannot see.

1247.2 in (120 cm)23.6 in (60 cm)7.9 in (20 cm)

Fit map

  • Open counter envelope
  • 1. Skerton Pro Ceramic Coffee Mill (MMCS-2B) · 6.6 in (16.7 cm) × 3.7 in (9.5 cm)manufacturer figure, not measured by us
  • 2. Takeya Cold Brew Coffee Maker · 6.1 in (15.5 cm) × 4.1 in (10.4 cm)manufacturer figure, not measured by us
  • 34.6 in (87.8 cm) of width free, at most
  • 3 clearances are unmeasured: depth (De'Longhi LatteMix Cold and Hot Milk Frother), height (De'Longhi LatteMix Cold and Hot Milk Frother), width (De'Longhi LatteMix Cold and Hot Milk Frother)
Available
47.2 in (120 cm) × 23.6 in (60 cm)
Required
cannot be computed
Usable for fit
6 of 16

Open counter drawn to scale at 47.2 in (120 cm) by 23.6 in (60 cm). Plan of this setup, each item drawn to its measured size: Skerton Pro Ceramic Coffee Mill (MMCS-2B) 6.6 in (16.7 cm) by 3.7 in (9.5 cm); Takeya Cold Brew Coffee Maker 6.1 in (15.5 cm) by 4.1 in (10.4 cm). The room each item needs around it is drawn without a size, because no maker publishes one; it is not to scale. At most 34.6 in (87.8 cm) of width is left over: 47.2 in (120 cm) available less 12.7 in (32.2 cm) taken up by the items' measured sizes, with no clearance subtracted.

The circuit

Every reference circuit, judged the same way.

15 A shared kitchen circuitLikely, from published figures: Likely

Fits a 15A circuit. At least one figure behind this is a number nobody has stated.

20 A shared kitchen circuitLikely, from published figures: Likely

Fits a 20A circuit. At least one figure behind this is a number nobody has stated.

dedicated 20 A circuitConfirmed from measurements: Confirmed

Fits a 20A circuit. At least one figure behind this is a number nobody has stated.

The budget

What the items the setup needs cost together, at the sellers' prices.

$263.44no ceiling stated

No ceiling is stated for this setup.

Where the facts come from 6 figures · 6 usable for fit

8 facts: 8 from manufacturer pages.

  • 8Manufacturer
  • 0differ
Evidence: a decision figure is missing or unsourced: Needs a check
Every fact (8)
ProductFactValueSource typeSourceDatedStateUsedWhat it decides
De'Longhi LatteMix Cold and Hot Milk Frotherwattage500 WManufacturerdelonghi.comEvidence: complete, from published figures, not measured: PublishedYesUsed for power
Skerton Pro Ceramic Coffee Mill (MMCS-2B)depth3.7 in (9.5 cm)Manufacturerhario-usa.comEvidence: complete, from published figures, not measured: PublishedYesUsed for fit
Skerton Pro Ceramic Coffee Mill (MMCS-2B)height7.7 in (19.5 cm)Manufacturerhario-usa.comEvidence: complete, from published figures, not measured: PublishedYesUsed for fit
Skerton Pro Ceramic Coffee Mill (MMCS-2B)width6.6 in (16.7 cm)Manufacturerhario-usa.comEvidence: complete, from published figures, not measured: PublishedYesUsed for fit
Takeya Cold Brew Coffee Makerdepth4.1 in (10.4 cm)Manufacturertakeyausa.comEvidence: complete, from published figures, not measured: PublishedYesUsed for fit
Takeya Cold Brew Coffee Makerheight9.3 in (23.5 cm)Manufacturertakeyausa.comEvidence: complete, from published figures, not measured: PublishedYesUsed for fit
Takeya Cold Brew Coffee Makerweight1 lb (467 g)Manufacturertakeyausa.comEvidence: complete, from published figures, not measured: PublishedYesNot used for fit
Takeya Cold Brew Coffee Makerwidth6.1 in (15.5 cm)Manufacturertakeyausa.comEvidence: complete, from published figures, not measured: PublishedYesUsed for fit
The full measurement table, with every figure we hold and where it came from
Every figure is marked with where it came from. A manufacturer or retailer number is a published claim, not a measurement; only “we measured” and “owner measured” are independent measurements. Operating clearances are the fields that decide real fit, and none have been recorded yet.
MeasurementSkerton Pro Ceramic Coffee Mill (MMCS-2B)De'Longhi LatteMix Cold and Hot Milk FrotherTakeya Cold Brew Coffee Maker
width6.6 in (16.7 cm) manufacturersource6.1 in (15.5 cm) manufacturersource
depth3.7 in (9.5 cm) manufacturersource4.1 in (10.4 cm) manufacturersource
height7.7 in (19.5 cm) manufacturersource9.3 in (23.5 cm) manufacturersource

What this check is judged on

Space is judged against the station's stated width, depth and height, using each product's envelope and whatever operating clearances are published. The check does not see an obstacle inside that gap - a cabinet overhang, a wall bracket, a splashback lip - or anything you keep on the counter that is not part of this setup.

Electrical load is the sum of the products declared here against one circuit profile. It does not see other appliances on the same circuit that this setup does not declare, the condition of your wiring, or a supply outside the regime the circuit names.

Pairings are recorded one by one, and a pairing shows here only once a reviewer has signed it against measured evidence.