Details
- Availability
- Check the listing for stock
- Authorization
- The seller behind this listing varies
- Returns
- Check the seller's return window before you buy.
Baratza's entry grinder, for brewed coffee only, and it does not claim to grind for espresso.
$149.95
At Baratza · Oct 29
Check price at AmazonAdd to Amazon cartView at BaratzaCompare this
11 reports · 4 sources, across 7 topics
Against your counter
Give us the three numbers and this drawing puts the machine on your own counter.
Room the Encore Coffee Grinder asks for around it
Nothing is drawn for a figure nobody states, and the answer above stays at what published figures can carry.
Makers and retailers publish 3 of the 8 figures a fit check uses, 1 of them with differing published figures; the other 5 you measure on your counter like this:
Nothing fits on its own, it fits a particular counter, so this page holds the figures and a setup makes the call.
Your counter has 4.7 in (12 cm) across and 6.3 in (16 cm) front to wall to give it.
Height: published figures differ, 13 in (33 cm), 13.4 in (34 cm) and 13.8 in (35 cm). It clears any gap of 13.8 in (35 cm) or more; below 13 in (33 cm) it doesn't fit; in between, measure against the machine itself.
Your counter has more room than this one asks for. The Virtuoso+ Coffee Grinder (ZCG587) is 0.4 in (1 cm) larger across, in the same category, and we have its width and depth figures too.
Baratza Encore draws at 120 V, 0.8 A on the circuit. Every figure behind this is a manufacturer's published dimension, and nobody has put a tape on one.
In no published setup yet
Build a setup from the start page and this product gets judged against your counter.
What each merchant showed, and the day we looked.
Same price at all 4 sellers: $149.95 · Oct 29.
30-day returns
Refunds a price drop within 30 days · 30-day returns
Refunds a price drop within 14 days
What owners say in their own reviews and posts, on the things no maker states: the tank, the hopper, the room around the machine. We quote them; we never use their words as a measurement or a fit answer.
In short
Eleven reports describe the Encore. Reports split on fitting under a cabinet: one finds it harder to use there than a shorter grinder, while another runs it under the cabinets with a fairly small footprint. Three reports on the hopper deal with the gasket where it meets the burr carrier, one finding that gasket bent out of shape, and single reports call it not super loud, find it heavy enough to stay put and run one-handed, and find the chute awkward to clean. The biggest caution comes from one long-term report on its third unit in fifteen years: the first overheated on a large batch, the second just quit, and the third gummed up almost immediately on an oily dark roast shipped by mistake. The full reports are below, grouped by topic.
What an owner wroteAs of 10 September 2026. We quote owners in their own words; it is never a measurement or a fit answer.
Two reports differ on cabinet clearance: one finds the Encore tougher to use under a cabinet than a shorter grinder, while the other says it fits under the cabinets with a fairly small footprint.
for an Encore, it's a little tougher to use when it's under a cabinet
an owner of both finds the Encore harder to use under a cabinet than a shorter grinder
a forum post, www.home-barista.com · 2020-11-13
Fits under the cabinets on the counter with a fairly small footprint
an owner runs the grinder under his cabinets and does not raise loading it as a problem
a review on a retailer's site, www.wholelattelove.com · 2020-10-26
Three reports, two of them from the same forum thread, describe the hopper's gasket: one says a new unit arrived with the gasket bent out of shape, and the other two explain what it does, sealing the joint between hopper and burr carrier and filling the gap the adjustment collar's vertical travel leaves.
the silicone gasket that is placed directly on the burr grinder is bent
a grinder arrived with the gasket that sits under the hopper on the burr carrier out of shape
a forum post, www.home-barista.com · 2015-11-04
It fits tightly to the hopper and around the burr carrier
the gasket seals the joint between hopper and burr carrier and lifts away with the hopper
a forum post, www.home-barista.com · 2015-11-05
clearance between the hopper and the grinder is needed
the adjustment collar travels vertically, so the hopper cannot seat flush and a gasket fills the gap
a forum post, www.home-barista.com · 2024-03-21
the poster owns a Vario and is describing how this family of grinders is built, not reporting on an Encore of his own
Noise, mess, the first weeks, how it holds up: what owners wrote about the days after the box. Reviews, in their words, counted one by one; none is a measurement and none touches the fit answer.
What an owner wroteAs of 10 September 2026. We quote owners in their own words; it is never a measurement or a fit answer.
One report says the grinder gummed up almost immediately when an oily dark roast was ground fine.
it almost immediately gummed up the insides of the grinder
an owner's third unit in fifteen years gummed up when an accidentally-shipped oily dark roast was ground fine
a review on a retailer's site, www.wholelattelove.com · 2019-10-08
the same review describes two earlier units of this grinder dying, one from overheating on a large batch and one that just quit; kept here for the oily-bean clog
Two reports, both from the same retailer page, note extra cleaning steps: one finds the chute between the grinding chamber and the container awkward, though canned air or a pipe-cleaner clears it, and the other points out the hopper and bin must be handwashed rather than going in a dishwasher.
chute between the grind chamber and the grounds container is a bit difficult to clean
an owner finds the chute between the grinding chamber and the grounds container awkward to clean, though canned air or a pipe-cleaner works
a review on a retailer's site, www.wholelattelove.com · 2012-04-12
the hopper and bin must be handwashed
another owner notes the hopper and bin require hand-washing per the manual, unlike his old grinder's dishwasher-safe parts
a review on a retailer's site, www.wholelattelove.com · 2020-06-24
One report says the grinder is not super loud and calls it a great value for a burr grinder.
Not super loud and a great value for a burr grinder!
one buyer puts the “how loud it is” at moderate rather than severe
a review on a retailer's site, www.wholelattelove.com · date not shown
the shop prints no date on this review
One report describes a third unit in fifteen years, after the first overheated on a large batch and the second stopped working.
I'm now on my third one, in 15 years
the same owner as the “beans that clog it” report is on a third unit in fifteen years after the first overheated on a large batch and the second just quit
a review on a retailer's site, www.wholelattelove.com · 2019-10-08
same review as this product's “beans that clog it” report from this reviewer
One report finds it heavy enough to stay put on the counter and run one-handed.
the weight of the machine is enough that it doesn't tip or slide
the same owner as the “cleaning it” report above finds it heavy enough to stay put and run one-handed
a review on a retailer's site, www.wholelattelove.com · 2012-04-12
same review as this product's “cleaning it” report from this reviewer
The size, and where each figure comes from
Baratza Encore is 4.7 in (12 cm) wide, 6.3 in (16 cm) deep (twinpike.com, 3 September 2026) and height: published figures differ. The weakest figure behind this comes from a retailer listing, not the manufacturer.
Where the published figures differ · none used for fit
Setistry does not use these figures for fit. A measurement of the unit is what settles it.
| Product | Fact | Value | Source type | Source | Dated | State | Used | What it decides |
|---|---|---|---|---|---|---|---|---|
| Encore Coffee Grinder | amperage | 0.8 A | Manufacturer | baratza.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for power | |
| Encore Coffee Grinder | depth | 6.3 in (16 cm) | Retailer | twinpike.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for fit | |
| Encore Coffee Grinder | height | 13.4 in (34 cm) | Manufacturer | baratza.com | Published figures differ, neither is used: Published figures differ | No | Used for fit | |
| Encore Coffee Grinder | voltage | 120 V | Manufacturer | baratza.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for power | |
| Encore Coffee Grinder | wattage | 70 W | Manufacturer | baratza.com | Published figures differ, neither is used: Published figures differ | No | Used for power | |
| Encore Coffee Grinder | weight | 6.8 lb (3.1 kg) | Retailer | twinpike.com | Evidence: complete, from published figures, not measured: Published | Yes | Not used for fit | |
| Encore Coffee Grinder | width | 4.7 in (12 cm) | Retailer | twinpike.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for fit |
The picture · why this one is drawn
As of26 September 2026Sourcestwinpike.com · baratza.comMeasured by usnothing yet; published figures only