A ThermoJet heater that Breville's page lists as ready in three seconds, in an all in one with a built in grinder and an LCD display.
$849.95
At Breville · Oct 29
Check price at AmazonAdd to Amazon cartView at BrevilleCompare this
7 reports · 1 source, across 3 topics
Against your counter
Give us the three numbers and this drawing puts the machine on your own counter.
Room the Barista Pro Espresso Machine asks for around it
Nothing is drawn for a figure nobody states, and the answer above stays at what published figures can carry.
Makers and retailers publish 3 of the 11 figures a fit check uses; the other 8 you measure on your counter like this:
Nothing fits on its own, it fits a particular counter, so this page holds the figures and a setup makes the call.
Your counter has 13.9 in (35.4 cm) across and 16.1 in (41 cm) [John Lewis prints 13.5 in (34.3 cm)] front to wall to give it, with 16 in (40.6 cm) clear above.
The tank lifts out of the top, so the published height, 16 in (40.6 cm), is the height standing still, not the height in use. Measure the clearance above the counter, not just the counter. (retailer)
Your counter is tighter than that. The Bambino Plus Espresso Machine (BES500) is 6.2 in (15.8 cm) narrower, in the same category, and we have its width and depth figures too.
Breville Barista Pro draws 1680 W at 120 V. Every figure behind this is a manufacturer's published dimension, and nobody has put a tape on one.
The Breville Barista Pro tank comes out of the top.
The setup it lives in
What each merchant showed, and the day we looked.
Breville's warranty covers units bought from an authorized seller; it excludes non-authorized sellers online, auction, eBay and other independent e-commerce sites not authorized by Breville (2 September 2026). warranty page
Units bought from a seller marked Authorized or Brand store are covered by the maker's warranty.
Out of stock at Whole Latte Love · Oct 29
Refunds a price drop within 14 days
What owners say in their own reviews and posts, on the things no maker states: the tank, the hopper, the room around the machine. We quote them; we never use their words as a measurement or a fit answer.
In short
Seven reports describe the Barista Pro, all from a single source. One says it fits under kitchen cabinets, and another calls it compact for what it offers. Two say water collects in the storage tray behind the drip tray. The biggest caution is the hopper: three reports say beans clog instead of falling into the grinder, need a tap to go down, or collect around the hopper base for want of a gasket. The full reports are below, grouped by topic.
What an owner wroteAs of 8 September 2026. We quote owners in their own words; it is never a measurement or a fit answer.
Two reports, both from the maker's own review page, say water collects in the storage tray behind the drip tray.
the storage tray behind the water tray always fills up with water
rear storage tray collects water behind the tank
a review on the maker's own site · 2024-06-19
moisture goes into the storage tray (located behind drip tray)
moisture collects in a tray located behind the drip tray
a review on the maker's own site · 2022-12-15
Two reports, both from the maker's own review page, describe the machine's size: one says it fits under the kitchen cabinets without major hassle, and the other calls it compact for what you get and says it fits nicely.
It fits under our kitchen cabinets, so there's no major hassle
fits under kitchen cabinets
a review on the maker's own site · 2020-10-26
this is rather compact for what you get, and it fits nicely
compact, fits nicely on countertop
a review on the maker's own site · 2019-03-25
Three reports, all from the maker's own review page, describe the hopper clogging: beans fail to fall into the grinder and have to be sent down by tapping the hopper, and one says beans collect around its base because there is no gasket.
issues with the hopper getting clogged and the beans not falling
beans clog and do not fall into the grinder
a review on the maker's own site · 2021-07-15
have to tap the hopper to send beans down and the grinder
must tap the hopper to send beans down
a review on the maker's own site · 2022-10-20
Coffee hopper needs better design, needs a gasket to prevent beans
beans collect around the hopper base, no gasket
a review on the maker's own site · 2022-03-07
The size, and where each figure comes from
Breville Barista Pro is 13.9 in (35.4 cm) wide, 16.1 in (41 cm) deep and 16 in (40.6 cm) tall (birite.com.au, 25 September 2026), though John Lewis prints the depth as 13.5 in (34.3 cm). The weakest figure behind this comes from a retailer listing, not the manufacturer.
| Product | Fact | Value | Source type | Source | Dated | State | Used | What it decides |
|---|---|---|---|---|---|---|---|---|
| Barista Pro Espresso Machine (BES878) | depth | 16.1 in (41 cm)John Lewis prints 13.5 in (34.3 cm) | Retailer | birite.com.au | Evidence: complete, from published figures, not measured: Published | Yes | Used for fit | |
| Barista Pro Espresso Machine (BES878) | height | 16 in (40.6 cm) | Retailer | birite.com.au | Evidence: complete, from published figures, not measured: Published | Yes | Used for fit | |
| Barista Pro Espresso Machine (BES878) | voltage | 120 V | Manufacturer | assets.breville.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for power | |
| Barista Pro Espresso Machine (BES878) | wattage | 1680 W | Manufacturer | assets.breville.com | Evidence: complete, from published figures, not measured: Published | Yes | Used for power | |
| Barista Pro Espresso Machine (BES878) | weight | 20.9 lb (9.5 kg) | Manufacturer | breville.com | Evidence: complete, from published figures, not measured: Published | Yes | Not used for fit | |
| Barista Pro Espresso Machine (BES878) | width | 13.9 in (35.4 cm) | Retailer | birite.com.au | Evidence: complete, from published figures, not measured: Published | Yes | Used for fit |
The picture · why this one is drawn
As of25 September 2026Sourcesbirite.com.au · breville.com · assets.breville.comMeasured by usnothing yet; published figures only
