If you have the height
DF64 Gen 2 Single Dose Coffee
11.8 in (30 cm)height · retailer
$250+BAND ONLY
View at Amazon (affiliate link)
Two products, and a counter we have not seen
Four rows we can fill.
A comparison table is usually the same length whatever is actually known. This one is as long as the evidence and no longer.
DF64 Gen 2 Single Dose Coffee Grinder or Ode Brew Grinder Gen 2: where they actually differ
The two of them
The two of them, on the figure this page turns on.
If the counter is tight
Ode Brew Grinder Gen 2
9.8 in (24.8 cm)height · manufacturer
$400AT FELLOW · READ 10 SEPTEMBER
View at Amazon (affiliate link)| What decides it | If you have the heightDF64 Gen 2 Single Dose Coffee$250+ · band only | If the counter is tightOde Brew Grinder Gen 2$400 | The difference |
|---|---|---|---|
| 4 rows we can fill | |||
| Width | DF64 Gen 2 Single Dose Coffee5.1 in (13 cm)largerRETAILER · READ 1 September 2026 | Ode Brew Grinder Gen 24.1 in (10.5 cm)smallerMANUFACTURER · READ 6 September 2026 | The difference1 in (2.5 cm)ODE BREW GRINDER GEN 2 IS SMALLER |
| Height | DF64 Gen 2 Single Dose Coffee11.8 in (30 cm)largerRETAILER · READ 1 September 2026 | Ode Brew Grinder Gen 29.8 in (24.8 cm)smallerMANUFACTURER · READ 6 September 2026 | The difference2 in (5.2 cm)ODE BREW GRINDER GEN 2 IS SMALLER |
| Power rating | DF64 Gen 2 Single Dose Coffee250 WlargerRETAILER · READ 2 September 2026 | Ode Brew Grinder Gen 2140 WsmallerMANUFACTURER · READ 6 September 2026 | The difference110 WODE BREW GRINDER GEN 2 IS SMALLER |
| Voltage | DF64 Gen 2 Single Dose Coffee120 VRETAILER · READ 2 September 2026 | Ode Brew Grinder Gen 2120 VMANUFACTURER · READ 3 September 2026 | The differenceThe same |
| 8 rows we will not fill · stated, not hidden | |||
| Depth | Sources disagreeSources disagree for the DF64 Gen 2 Single Dose Coffee, so that reading is not used. | ||
| Space behind it | Not on recordNeither maker publishes it. | ||
| Space beside it | Not on recordNeither maker publishes it. | ||
| Space above it | Not on recordNeither maker publishes it. | ||
| Weight | Sources disagreeSources disagree for the DF64 Gen 2 Single Dose Coffee, so that reading is not used. | ||
| Shot quality | Not ours to sayNot ours to say, nobody here has pulled one. | ||
| Reliability over five years | Not ours to sayNot ours to say, we hold no service data. | ||
| Build quality | Not ours to sayNot ours to say, no unit has been handled here. | ||
| Still missing before a fit answer | DF64 Gen 2 Single Dose CoffeeNothing missingSources disagree on depth, weight; on record, not used. | Ode Brew Grinder Gen 2Nothing outstanding | The differenceNot comparable |
| Its own page | See the DF64 Gen 2 Single Dose Coffee | See the Ode Brew Grinder Gen 2 | |
Every figure here is one the maker published; the difference beside it is our subtraction, in the row's own unit.
What owners report
DF64 Gen 2 Single Dose Coffee
What owners report about the room it needs 3 reports
Owner report, not evidenceRead 10 September 2026. Owners' own words on what no maker states; never a figure, never used for fit.
reaching the hoppertwo owners
is 15" tall and the angle makes it easy to charge the beans even with
an angled-base DF64 makes charging (loading) beans easy while the grinder stays tucked under the wall cabinet
a forum post · 2022-10-09 · read 10 September 2026
poster does not state whether this is the Gen 2 or the original DF64
I know my kid can take off the lid and grind his finger
the lid lifts off with no interlock, so the grinder can run with it open
a forum post, www.home-barista.com · 2025-05-19 · one voice, a single post · read 10 September 2026
room aboveone owner
The DF64 with a 3D printed angled base is 15" tall and
with a 3D printed angled base, this DF64 is 15 inches tall and fits tucked under the poster's wall cabinet
a forum post · 2022-10-09 · read 9 September 2026
poster does not state whether this is the Gen 2 or the original DF64
What owners report about living with it 4 reports
Owner report, not evidenceRead 10 September 2026. Owners' own words on what no maker states; never a figure, never used for fit.
what a new unit needed firsttwo owners
out-of-the-box, it was not Zeroed (not even close)
a new unit arrived with the burrs nowhere near zero and had to be calibrated before it ground properly
a forum post, www.home-barista.com · 2024-03-09 · one voice, a single post · read 10 September 2026
the same post recommends checking the zero point before the grinder is first switched on
My burr touch was (clockwise turn) 1 inch below 0 on the dial
on one unit the burrs met well below the dial's zero mark, which is how far the factory setting was out
a forum post, www.home-barista.com · 2024-03-12 · one voice, a single post · read 10 September 2026
how loud it isone owner
Way too noisy and screechy
an owner who states almost a year of use calls the grinder too noisy and screechy
a forum post, www.home-barista.com · 2025-05-19 · one voice, a single post · read 10 September 2026
the same post describes carrying the grinder out to the balcony to grind in the morning without waking the house; that is the reader's summary of the post and not part of the quoted words
how it holds upone owner
don't have what I would consider adequate QA
a long-standing member judges quality control on these grinders inadequate and tells buyers to weigh after-sales support
a forum post, www.home-barista.com · 2024-03-12 · one voice, a single post · read 10 September 2026
the statement covers the DF series and budget grinders broadly, not the Gen 2 specifically
Ode Brew Grinder Gen 2
What owners report about the room it needs 6 reports
Owner report, not evidenceRead 10 September 2026. Owners' own words on what no maker states; never a figure, never used for fit.
room aboveone owner
the space under my kitchen cabinets is limited
an owner works in limited headroom and taps the hopper with a cup rather than fitting a bellows
a forum post, www.home-barista.com · 2025-09-07 · one voice, a single post · read 10 September 2026
reaching the hoppertwo owners
I wish there was a rim around the whole thing that was deep enough
the hopper lid does not seat securely because its rim is too shallow
a review video's captions, www.youtube.com · 2023-03-01 · one voice, a single post · read 10 September 2026
auto-generated captions
there's also that awkwardness to the lids of both the hopper and the catch cup
a second reviewer finds both lids awkward to seat
a review video's captions, www.youtube.com · 2023-03-14 · one voice, a single post · read 10 September 2026
auto-generated captions
loading the hopperthree owners
the angle of the hopper has changed
Gen 2 steepened the hopper so poured beans fall through instead of sitting in it
a review video's captions, www.youtube.com · 2023-02-27 · one voice, a single post · read 10 September 2026
uploaded captions, not auto-generated
the sleek just-in-time load bin suits my needs perfectly
the grinder is loaded from the top one dose at a time, with no standing hopper to empty when beans change
a review on a retailer's site, clivecoffee.com · 2025-02-21 · one voice, from a page of 16 · read 10 September 2026
the low angle of the hopper and the style of feedport
oily beans feed badly because the loading bin sits at a shallow angle above a narrow port
a review on a retailer's site, clivecoffee.com · 2025-01-07 · one voice, from a page of 16 · read 10 September 2026
What owners report about living with it 7 reports
Owner report, not evidenceRead 10 September 2026. Owners' own words on what no maker states; never a figure, never used for fit.
cleaning itone owner
Ok so I cleaned the little tabs in the chute and it sorted things
brushing the anti-static tabs inside the chute restores the behaviour the grinder had when new
a forum post, www.home-barista.com · 2023-03-24 · one voice, a single post · read 10 September 2026
the same post says getting a brush in behind the parts that clog is awkward but takes seconds
how loud it isthree owners
this one is way less noise and static
an owner of the first generation finds the second quieter and less prone to static
a review on a retailer's site, clivecoffee.com · 2026-07-03 · one voice, from a page of 16 · read 10 September 2026
It grinds fast, quietly, and oh, the clarity it brings to the cup
a dated owner rates the grinder quiet
a review on a retailer's site, clivecoffee.com · 2026-07-10 · one voice, from a page of 16 · read 10 September 2026
the same review says he replaced a Baratza Encore with it
Nice and quiet. Solid build and versatility
a third dated owner rates the grinder quiet
a review on a retailer's site, clivecoffee.com · 2025-03-05 · one voice, from a page of 16 · read 10 September 2026
written through the Shop App and not marked verified on the shop
static and messthree owners
static grounds all over the top of the container, random drops and .5-.7g of retention
grounds land on the catch cup and retention rises to roughly half a gram from about a tenth
a forum post, www.home-barista.com · 2023-03-21 · one voice, a single post · read 10 September 2026
the same post dates the change to about six weeks of use and says the behaviour is close to the first generation's
Very quiet, zero frass from static
an owner reports it quiet with no static-driven mess
a review on a retailer's site, www.wholelattelove.com · 2024-12-18 · one voice, from a page of 9 · read 10 September 2026
the massive issues with grind retention and mess
an owner who replaced a Baratza Encore says the shop never disclosed the retention and mess problems, and found aftersales help unhelpful
a review on a retailer's site, clivecoffee.com · 2023-03-10 · one voice, from a page of 16 · read 10 September 2026
the shop does not mark this reviewer verified
Your counter decides it.
If the counter is tight: the Ode Brew Grinder Gen 2. If you have the height: the DF64 Gen 2 Single Dose Coffee.
Between 9.8 in (24.8 cm) and 11.8 in (30 cm) only the Ode Brew Grinder Gen 2 clears. At 11.8 in (30 cm) or more the height decides nothing, and under 9.8 in (24.8 cm) neither of them fits. (retailer)
We are not picking one. Your counter picks it, and yours is the measurement missing from this page.
Measure from the counter to the highest point, with any lid or hopper closed.